博客
关于我
强烈建议你试试无所不能的chatGPT,快点击我
10分钟带你了解MSTP协议,附加配置MSTP实验
阅读量:343 次
发布时间:2019-03-04

本文共 4563 字,大约阅读时间需要 15 分钟。

10分钟带你了解MSTP协议,附加配置MSTP实验

目录

一 MSTP协议

【1】STP和RSTP的局限性

【2】关于MSTP

【3】MSTP的基本思想

【4】MSTP的功能

【5】三种生成树的比较

【6】MSTP的域

【7】配置MSTP

二MTP实验题

一.MSTP协议

STP生成树协议
RSTP快速生成树协议
MATP多生成树协议
【1】STP和RSTP的局限性:所有VLAN 共享一颗生成树,无法实现多条VLAN再链路上的负载分担
【2】关于MSTP:
在这里插入图片描述
【3】MSTP的基本思想:
在这里插入图片描述

【4】MSTP的功能:mstp为每个实例计算出一颗树,防环的同时进行了冗余备份,实现VLAN之间的负载分担

在这里插入图片描述
【5】三种生成树的比较:
在这里插入图片描述
【6】MSTP的域:
在这里插入图片描述注意:域名相同,修订级别(0-65535,默认为0)。VLAN映射(VLAN与映射的关系)三者都相同为一个域
在这里插入图片描述
【7】配置MSTP
【1.1】区域配置
在这里插入图片描述
注:instance 0为默认实例,如通VLAN1一样

【2.2】配置实例与vlan的映射关系,激活域

在这里插入图片描述
【3.3】配置交换机在每个实例中根的情况
在这里插入图片描述
注:修改优先级必须是4096的倍数,最小为0

二.实验题

在这里插入图片描述
SW1的代码:

system-view [1]sysname W1[W1] vlan batch 10 20W1]int e0/0/1[W1-Ethernet0/0/1]port hybrid pvid vlan 10[W1-Ethernet0/0/1]port hybrid untagged vlan 10 20[W1-Ethernet0/0/1]int e0/0/1[W1-Ethernet0/0/1]int g0/0/2[W1-GigabitEthernet0/0/2]p l t[W1-GigabitEthernet0/0/2]p l a v a ^Error:Ambiguous command found at '^' position.[W1-GigabitEthernet0/0/2]p t a v a[W1-GigabitEthernet0/0/2]int e0/0/2[W1-Ethernet0/0/2]port hybrid pvid 10 ^Error: Unrecognized command found at '^' position.[W1-Ethernet0/0/2]port hybrid pvid vlan 10[W1-Ethernet0/0/2]port hybrid untagged vlan 10 20[W1-Ethernet0/0/2]q[W1]stp region-c [W1]stp region-configuration [W1-mst-region]region-na [W1-mst-region]region-name WW[W1-mst-region]instance 1 vlan 10[W1-mst-region]instance 2 vlan 20[W1-mst-region]active [W1-mst-region]active re [W1-mst-region]active region-configuration Info: This operation may take a few seconds. Please wait for a moment...done.[W1-mst-region]stp instance [W1-mst-region]stp instance 1 root [W1-mst-region]stp instance 1 root primary [W1-mst-region]stp instance 1 root primary[W1]stp re [W1]stp region-configuration [W1-mst-region]stp instancce 2 root secondary ^Error: Unrecognized command found at '^' position.[W1-mst-region]stp instance 2 root secondary

SW2的代码

W2]vlan  batch 10 20Info: This operation may take a few seconds. Please wait for a moment...done.[W2]int e0/0/1[W2-Ethernet0/0/1]p  h p v 20[W2-Ethernet0/0/1]p h u v 10 20[W2-Ethernet0/0/1]int g0/0/2[W2-GigabitEthernet0/0/2]p l t [W2-GigabitEthernet0/0/2]p t a v a [W2-GigabitEthernet0/0/2]int e0/0/2[W2-Ethernet0/0/2]port hybrid  pvid 20                                    ^Error: Unrecognized command found at '^' position.[W2-Ethernet0/0/2]port hybrid pvid vlan 20[W2-Ethernet0/0/2]port hybrid untagged vlan 10 20[W2-Ethernet0/0/2]q[W2]stp re	[W2]stp region-configuration [W2-mst-region]region-	[W2-mst-region]region-name WW[W2-mst-region]instance 1 vlan 10 [W2-mst-region]instance 2 vlan 20[W2-mst-region]active region-configurationInfo: This operation may take a few seconds. Please wait for a moment...done.[W2-mst-region]stp instance 2 root primary[W2]stp region-	[W2]stp region-configuration [W2-mst-region]stp instance 1 root secondary

SW2的代码

Huawei]vlan  batch 10 20 Info: This operation may take a few seconds. Please wait for a moment...done.[Huawei]int e0/0/1[Huawei-Ethernet0/0/1]port hybrid untagged vlan 10 20[Huawei-Ethernet0/0/1]port hybeid pvid vlan 10                           ^Error: Unrecognized command found at '^' position.[Huawei-Ethernet0/0/1]port hybrid pvid vlan 10[Huawei-Ethernet0/0/1]int e 0/0/3[Huawei-Ethernet0/0/3]port  hybrid pvid vlan 10[Huawei-Ethernet0/0/3]port hybrid tagged vlan 10 20[Huawei-Ethernet0/0/3]int e0/0/4[Huawei-Ethernet0/0/4]port hybrid pvid vlan 20[Huawei-Ethernet0/0/4]port hybrid untagged vlan 10 20[Huawei-Ethernet0/0/4]int e0/0/3[Huawei-Ethernet0/0/3]undo port hybrid tagged vlan 10 20[Huawei-Ethernet0/0/3]port hybrid  untagged vlan 10 20[Huawei-Ethernet0/0/3]int e0/0/2[Huawei-Ethernet0/0/2]port hybrid pvid vlan 20[Huawei-Ethernet0/0/2]port hybrid untagged vlan 10 20 [Huawei-Ethernet0/0/2]re	[Huawei-Ethernet0/0/2]restart	[Huawei-Ethernet0/0/2]q[Huawei]re	[Huawei]stp region-configuration[Huawei-mst-region]region-name WW[Huawei-mst-region]instance 1 vlan 10[Huawei-mst-region]instance 2 vlan 20

R1的代码

Huawei>sys	
system-view Enter system view, return user view with Ctrl+Z.[Huawei]sys [Huawei]sysname R1[R1]INT [R1]interface G0/0/0[R1-GigabitEthernet0/0/0]IP ADDRESS 192.168.10.1 24Apr 11 2021 20:16:17-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [R1-GigabitEthernet0/0/0]int g0/0/1[R1-GigabitEthernet0/0/1]ip address 192.168.20.1 24Apr 11 2021 20:16:54-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [R1-GigabitEthernet0/0/1]q[R1]int loopback 0[R1-LoopBack0]ip address 1.1.1.1 24

连接:

在这里插入图片描述
在这里插入图片描述

转载地址:http://mzie.baihongyu.com/

你可能感兴趣的文章